Remote Pulse Counter Display

The i-meter® Remote Pulse Counter Display is a compact totalizing counter that captures pulse outputs from electrical, gas, water, and thermal energy meters, allowing for remote manual access to consumption data.

Easy to install and low cost, this display counter has improved noise immunity to provide accurate and reliable pulse counts.

Available for indoor and outdoor applications. The battery-operated i-meter® Remote Pulse Counter Display has an 8 digit display that can be reset when required.

The maximum distance allowed between the meter and pulse counter is 100 ft.

All displays come with a limited one-year warranty.

Specifications

Self-Powered Pulse Counter- Screw Terminal type

Model: DHC3J-8L

8 digit – resettable

Input signal: Relay or Reed switch dry contact- Open collector

Display 6.5 mm Liquid Crystal Display 8 digits

DC Voltage Input rating 0-2 Volts

AC Voltage Input rating: 110 Volts AC

Non-Voltage input rating:

Short Circuit Impedance: 10 KΩ (KOhm) max
Open Impedance: 500KΩ (KOhm) min.
Short Circuit Residual Voltage 0.5V

Maximum counting frequency 10 Hz. Minimum time-on 50 mS

Reset signal: >0.2 Sec.

Reset System: external shorting terminals #3 and #4

Operating Temperature 10oC to +40oC

Humidity 35% to 85% Relative Humidity

Accuracy: ≤0.002%

Battery expected life 5 years