Remote Pulse Counter Display
The i-meter® Remote Pulse Counter Display is a compact totalizing counter that captures pulse outputs from electrical, gas, water, and thermal energy meters, allowing for remote manual access to consumption data.
Easy to install and low cost, this display counter has improved noise immunity to provide accurate and reliable pulse counts.
Available for indoor and outdoor applications. The battery-operated i-meter® Remote Pulse Counter Display has an 8 digit display that can be reset when required.
All displays come with a limited one-year warranty.
Self-Powered Pulse Counter- Screw Terminal type
8 digit – resettable
Input signal: Relay or Reed switch dry contact- Open collector
Display 6.5 mm Liquid Crystal Display 8 digits
DC Voltage Input rating 0-2 Volts
AC Voltage Input rating: 110 Volts AC
Non-Voltage input rating:
- Short Circuit Impedance: 10 KΩ (KOhm) max
- Open Impedance: 500KΩ (KOhm) min.
- Short Circuit Residual Voltage 0.5V
Maximum counting frequency 10 Hz. Minimum time-on 50 mS
Reset signal: >0.2 Sec.
Reset System: external shorting terminals #3 and #4
Operating Temperature 10oC to +40oC
Humidity 35% to 85% Relative Humidity
Battery expected life 5 years
Pas de vidéo